LOWE Fuel Systems
NEW - VISIT our Alpha INDEX Page

All of our Products, Services and Information listed alphabetically
Click Here
LOWE  Fuel Systems  - Throttle cable hardware

53385-13022 Throttle return spring mount for Enderle throttle arms
Mounts to the two holes on the end of the Enderle throttle arm to attach the
return spring. See in photo below next to the Enderle throttle arm.
wpe2.jpg (16299 bytes)
Push pull cables -------------------------------------------------------------------------------
3/16" unf thread (10-32 tpi) with mounting slots each end.
Includes dust caps and lock nuts.
Cable jacket is smooth red nylon and the hardware is stainless.
See below for cable clamps and threaded end connections.
53140-00100 Push pull control cable 39" or 3'3"
53140-00125 Push pull control cable 49" or 4'1"
53140-00150 Push pull control cable 59" or 4'11"
53140-00175 Push pull control cable 69" or 5'9"
53140-00200 Push pull control cable 79" or 6'7"
53140-00225 Push pull control cable 89" or 7'5"
53140-00250 Push pull control cable 01" or 8'5"
53140-00275 Push pull control cable 08" or 9'0"
53140-00300 Push pull control cable 18" or 9'10"
53140-00325 Push pull control cable 28" or 10'8"
53140-00350 Push pull control cable 38" or 11'6"
53140-00375 Push pull control cable 48" or 12'4"
53140-00400 Push pull control cable 58" or 13'2"
53140-00425 Push pull control cable 67" or 13'11"
53140-00450 Push pull control cable 77" or 14''9"
53140-00475 Push pull control cable 87" or 15'7"
53140-00500 Push pull control cable 97" or 16'5"

There are two ways to hold the ends of the cable housing. One is to use a clamp listed below. Use either a full or a half clamp. The half clamp takes up less space and allows the cable to be mounted closer to the mounting bracket. The other way to hold the end of the cable housing is with a quick release clamp. These quick release clamps are very handy when used around the engine and transmission as they allow the maintenance work on the engine and trans to be done faster as they just unsnap from the clamp. Also the logical choice here is to use the quick release ball joints as well. With the quick release ball joints all you have to do is to pull the collar back and the joint releases from
the ball allowing a very fast release yet a very secure connection. See the cable threaded end connections section.

wpe2.jpg (16299 bytes)
Cable housing clamps ------------------------------------------------------------------------
53155-32620 Cable clamp .(full clamp)
53155-32621 Cable clamp .(1/2 clamp) CNC machined billet aluminum with 3/16" mounting
hole to secure cable housing to bracket

53155-01000 Cable bracket quick release clip
Stainless steel with 6 ea 3/16" adjustable mounting holes

Cable threaded end connections 3/16" unf (10-32 tpi) cable ends -------------------
53165-10000 Clevis 3/16 unf with 3/16" pin
53347-10100 3/16 Male thread (SAE) 3/16" Cable end
53347-10200 1/4 Male thread (SAE) 3/16" Cable end
53347-10300 5/16 Male thread (SAE) 3/16" Cable end
3155-01000 Cable housing quick release clip (stainless steel)
53385-13020 Enderle throttle arm return spring mount
53680-12050 Spring, throttle return 1/4" x 5"
53680-12390 Spring, throttle return 3/8" x 6.5"

Throttle pedals
Billet pedalsTublar pedals
53535-29010 Throttle pedal, CNC Billet aluminium, 8" x 4" w/ 1/4" hole, heel pivot
53535-29020 Throttle pedal, CNC Billet aluminium, 11" x 3 1/2" w/ 1/4" hole, heel pivot
53535-29030 Throttle pedal, CNC Billet aluminium, 11" x 3 1/2" w/ 1/4" hole, ankle pivot
53535-01101 Throttle pedal, tubular, 1/4" mount, heel pivot, side toe strap
53535-01102 Throttle pedal, tubular, 1/4" mount, ankle pivot, side toe strap
53535-01111 Throttle pedal, tubular, 1/4" mount, heel pivot, top toe strap
53535-01112 Throttle pedal, tubular, 1/4" mount, ankle pivot, top toe strap

For more cable and control mounting information please contact us for a brochure on the parts that we make for these applications. A complete range of motion controls for race car applications are available and usually in stock. We stock all the quick release joints and clips to make engine maintenance and race car disassembly quick and easy. A range of throttle pedals including billet aluminum and fabricated tubular steel pedals are in stock.
Throttle pedal on adjust-a-rail

PSI throttle cable bracket
wpeE.jpg (7866 bytes)
53090-00001 PSI throttle cable mount bracket
                    Fabricated bracket that attaches to PSI hat and has mounting holes for quick
                    release cable mount.

Throttle cable mount at tunnel ram and hat injection ------------
53090-10001 Tube steel throttle cable mount bracket for SBC Edelbrock tunnel ram and
Bugcatcher injection includes QD cable clip

53090-10002 Tube steel throttle cable mount bracket for BBC Edelbrock tunnel ram and
Birdcatcher injection, includes QD cable clip

Throttle bellcrank
wpeD.jpg (16308 bytes)
53065-89331 Bellcrank 90 degree, 1.75" arm, 1/4" bearing pivot, CNC billet aluminum

Fuel injection instruction book.
To order you book please include your complete name and address and phone number. Inside Australia I will ship your book COD Australia Post but outside Australia I must have a credit card number. This will be the best $99.95 you ever spent on your race car. Or about $75.00 US.
Click here to order your book now