scoops, seats and noses
Offset mag drives
Fittings and hardware
Hardware and brackets
Pedals, levers, cables and hardware
Shifters and controls
tools for race cars
Switches and connections
Mounting and hardware
Dzus fasteners and hardware
Bottle clamps and chassis clamps
Pumps and radiators
Gauges and mounting
Hardware and information
Ideas and Opinions
World Drag Racing Championships
Connections to the web
Hot off the drawing board
Parts for sale
New and used
People who impacted Ken Lowe
Drag Race Video's
Terms and Conditions
NEW - VISIT our Alpha INDEX Page
All of our Products, Services and Information listed alphabetically
The XDL package is essentially a complete dragster less
engine, trans, diff center, tires and wheels, wiring and gauges. You take the XDL paint
it, bolt the car together and go racing. Could it get any easier for you?
This photo does show the car with wheels, a display engine and some options (like front
brakes) that are not part of the XDL package. To see what the car looked like when it was
done have a look at the Drag Race School car. Or have a look at
the sister car of David Mullins or Graeme
Frawley's car. Your new race car could look just a good as thiers and run as well too.
Graeme Frawley and David Mullins have been trading the Willowbank track championship back
and forth now for 4 years. We would like to have you join our family.
What is a XDL?
X = This series of cars
D = dragster (A would be Altered)
L = this package (they range from A through Z packages)
The L package
is the same basic package from dragster to altered in so far as the L package is
essentialy a complete car less engine, trans, diff center, tires, wheels and gauges.
You paint it, bolt your stuff on and go racing. The packages between
each type of car (dragster or altered) is the same level of completion. For example, the
"A" package is a bare chassis - altered or dragster. XAA is a bare altered
chassis and XDA is a bare dragster chassis.
Complete list of components in XDL car package.
* 226" wheel base, 21" wide inside at the seat fits most 5'0" to 6'
* Engine location to suit shortie Powerglide.
* Chassis will fit SBC,BBC,Chrysler 383-426, 351C and 351W Fords (relocate starter) and
* Includes rear engine dragster chassis fully tig welded.
* Includes front bi pod spindle mounts.
* Includes chassis diff mounting plates (lightened).
* Includes SPE billet steel spindles.
* Includes Stilleto rack and pinion.
* Includes rack and pinion mounting.
* Includes tie rod kits includes hiem joints.
* Includes steering wheel with anodised grips.
* Includes steering wheel mounting and shaft to rack.
* Includes dashboard with cut out for Autometer tach and one 2 5/8" gauge and a
Dedenbear SCC-1 crossover delay box.
* Includes mounting the dashboard.
* Includes adjustable pedal assembly.
* Includes installation of the adjustable throttle and brake pedal assembly.
* Includes chassis brackets for pedal assembly adjustments and throttle cable chassis
* Includes master cylinder mounting bracket and linkage.
* Includes chassis port for brake line.
* Includes throttle return spring.
* Includes throttle return spring mounts.
* Includes Dedenbear mounting brackets.
* Includes dashboard rear cover and mounting with dzus mounting complete
* Includes fibreglass cover.
* Includes throttle pedal travel stop (adjustable).
* Includes throttle cable for xd car.
* Includes custom made Powerglide shifter designed for centre steer cars. Mounts on the
right side where the brake handle would go if the car had a clutch. Ultra slim design
takes up almost no cockpit space as most of the shifter will mount between the side
chassis rails. Comes with a reverse lock out and a easy neutral gate located high so it is
easy for the driver to operate, includes shifter cable.
* Includes master cylinder 3/4 bore.
* Includes flanged axle disk brake kit.
* Includes rotors, hats, calliper brackets, and callipers
* Includes parachute (Modified Eliminator).
* Includes parachute control lever for rear engine dragster.
* Includes parachute lever mounting and cable mounting with cable clamp.
* Includes parachute cable for rear engine dragster.
* Includes parachute pack mounting on rear engine dragster.
* Includes parachute chassis anchor point on rear engine dragster.
* Includes LOWE /Ford narrowed housing (flanged axle) mounted in chassis.
* Includes LOWE /Ford narrowed Ford housing with Ford flanged axle ends.
* Includes back brace & lightened diff brackets.
* Includes anti rotate brackets.
* Includes jack pad (installed).
* Includes flanged axles 35 spline Hy tuff.
* Includes wheel studs 1/2" x 3" (set of 10).
* Includes axle bearings.
* Includes aluminium fuel tank.
* Includes safety plate and mounting.
* Includes aluminium fuel tank mounting.
* Includes seat for dragster chassis.
* Includes seat mounting.
* Includes seat belts 5 point 3" harness.
* Includes seat belt mounting for rear engine dragster.
* Includes seat belt hooks.
* Includes front motor mounts - Floating front mounts labour and material.
* Includes aluminium front engine plates, tabs, bolts and clamps. CNC milled and drilled.
Options:Big block Chevy, Small block Chevy, 383,426,440 Chrysler
* Includes motor plate (rear) with floating top mounts, solid bottom mounts. CNC drilled
and profiled (Top and bottom) with floating mounts and clamps on top and used with solid
motor mount tabs on bottom Options:
BBC includes gear reduction starter hole
SBC includes gear reduction starter hole
* Includes rear engine dragster body XD. Material and labour to fabricate and install
aluminium body on rear engine dragster includes all panels around outside of (side and
top) drivers compartment forward with fibreglass nose.
* Includes windscreen.
* Includes all Dzus fasteners and brackets and tabs.
* Includes drivers compartment foot box panel with dzus fasteners.
* Includes drivers compartment floor pan, One piece pan .125 aluminium
* Includes dzus fasteners and brackets.
* Includes drivers compartment helmet peg on roll cage.
If the above package is not acceptable we can package any thing or combination that you
might desire, please just ask and we will put you one together.
Use your editor and block and copy to the email below and indicate which items you want
left off the quote.
-------------------- Order form ---------------------------
When filling in the information below please print. This order can be
mailed and or faxed to the above address/phone number.
Street address _____________________________________________
City _____________________ State _____ Post code _____________
Work phone number ______________Home phone number ___________
I am placing an order for the ____________ package.
Enclosed is my deposit of $ 1000.00.
Please call with my build number.
Signature below grants permission to start the building of my race car.
Please call me with my cars build number.
Signed _______________________________ Date _________
The 31 Chapter 200 page Fuel Injection book is
here for more info on what has
been called "the best fuel injection book on
this planet". Now only $99.95AUD If you only learn one thing
it is worth it
The FI book has been this price for ten years now, my publishing costs continue
to rise and soon I will have to raise the price.
Currently all orders are processed at the old price of $99.95 - don't miss out -
I must point out that my printing house (and all the rest of them as well)
have raised their prices so when this last printed batch of books are gone...
the price goes up. Order now and save.
Can I point out it is less than 50 cents a page!!!
We ship the FI book
inside Australia COD Australia Post. When the order arrives at your post office
you pay the postman and he sends the money to us. Outside Australia we require a
valid credit card to make the charges to.
"Ken Lowe Race Cars
Flowed Hilborn fuel systems
Drag Race School
Center steer drag race chassis hardware
Centre steer drag race chassis hardware
Specialty engine components
Drag Race Cars
Constant Flow Fuel Systems
Chevrolet Big Block
Chevrolet Small Block
Methanol Nitro Nitromethane
WDRC, NHRA, IHRA, UDRA, ANDRA
Surfers, Paradise, Australia
Gold, Coast, Oxenford,
fiberglass, carbon, Kevlar
supercharger, blower, drive,
crank, support, girdle, valve, covers
timing, cover, offset, magneto, belt
intake, manifold, pump, cam, floater
hubs, axles, coupler, wing, strut,
Goodyear, Romac, Yella Terra, Crow
Crankshaft, MSD Castrol, Powerglide
PSI,TAFC, TAD, data, logger, piston, rings, rods
supercharged drag racing
heads up drag racing
stage volume control
fully adjustable barrel valve
fully adjustable metering valve
dash 3 hose
Skid pad mounting
Weld on tabs
JESEL pump drive
JESEL fuel pump drive
Chevy JESEL fuel pump drive
FORD JESEL fuel pump drive
FORD Crank Support
351 Front Crank Support
350 Front Crank Support
427 Front Crank Support
Crank Bearing Supports
MSD ignition leads
MSD spark plug wires
MSD mag drive
Queensland Ignition Leads
Fuel Injection Hoses
Dash three hose
Dash 3 hose