Dragster package XDE

wpe50.jpg (3740 bytes)
Dragster package
XDE
wpe44.jpg (15040 bytes)
This is our XDE package shown with optional engine panels. We supply the fabricated hardware and you bolt the industry standard hardware on to the package. The XDE is a complete chassis, body, interior, seat, diff housing, parachute mount and controls, steering mounting and connections but not the rack or spindles which industry standard products bolt straight on. Industry standard axles and brakes bolt directly on to the diff housing. We will supply you with a list of items you need to purchase from us or anyother supplier so you can get your absolute best price. You have to do a little extra work but you could save some money with this package but you still get a lot of the special KLRC car features.

To see what the car looks like when it is finished have a look at the Drag Race School car as they are identical.

What is a XDE?
X = This series of cars
D = dragster (A would be Altered)
E = this package (they range from A through Z packages)

The E package is the same basic package from dragster to altered in so far as the E package is essentialy a complete chassis with steering mounts, diff housing, seat and mounting, body and mounting. You are left with a bit of work before you paint it, bolt your stuff on and go racing. The packages between each type of car (dragster or altered) is the same level of completion. For example, the "A" package is a bare chassis - altered or dragster. XAA is a bare altered chassis and XDA is a bare dragster chassis.

A detailed list of what you get with the standard XDE package.

* 226" wheel base chassis, 21" wide inside at the seat fits most 5'0" to 6' 6" driver
* Engine location to suit shortie Powerglide.
* Chassis will fit SBC,BBC,Chrysler 383-426, 351C and 351W Fords (relocate starter) and Holden.
* Includes chassis fully tig welded.
* Includes front bi pod spindle mounts.
* Includes chassis standard diff mounting plates.
* Includes standard rack and pinion mounting.
* Includes tie rod kits with hiem joints.
* Includes steering wheel.
* Includes steering wheel mounting and shaft to rack.
* Includes dashboard with cut out for Autometer tach and one 2 5/8" gauge and a Dedenbear SCC-1crossover delay box.
* Includes mounting the dashboard.
* Includes parachute control lever for rear engine dragster.
* Includes parachute lever mounting and cable mounting with cable clamp.
* Includes parachute cable for rear engine dragster.
* Includes parachute pack mounting on rear engine dragster.
* Includes parachute chassis anchor point on rear engine dragster.
* Includes LOWE /Ford narrowed housing (flanged axle) mounted in chassis.
* Includes narrowed Ford housing with Ford axle ends & diff brackets.
* Includes anti rotate brackets.
* Includes seat for dragster chassis.
* Includes seat mounting.
* Includes seat belt mounting for rear engine dragster.
* Includes rear engine dragster body XD. Material and labor to fabricate and
install aluminum body on rear engine dragster includes all panels around outside of (side and top) driver's compartment forward with fiberglass nose.
* Includes windscreen.
* Includes all Dzus fasteners and brackets and tabs.
* Includes drivers compartment foot box panel with Dzus fasteners.
* Includes drivers compartment floor pan, One-piece pan .120 aluminum with Dzus fasteners and brackets.

If the above package is not acceptable we can package any thing or combination that you might desire, please just ask and we will put you one together.
Use your editor and block and copy to the email below and indicate which items you want left off the quote.

Ken Lowe.

-------------------- Order form ---------------------------
When filling in the information below please print. This order can be
mailed and or faxed to the above address/phone number.

Name ____________________________________________________

Street address _____________________________________________

Suburb __________________________________________________

City _____________________ State _____ Post code _____________

Work phone number ______________Home phone number ___________

I am placing an order for the ____________ package.
Enclosed is my deposit of $ 1000.00.
Please call with my build number.
Signature below grants permission to start the building of my race car.
Please call me with my cars build number.

Signed _______________________________ Date _________